Assessment of water quality in Lake Garda (Italy) using Hyperion

For testing the integration of the remote sensing related technologies into the water quality monitoring programs of Lake Garda (the largest Italian lake), the spatial and spectral resolutions of Hyperion and the capability of physics-based approaches were considered highly suitable. Hyperion data were acquired on 22nd July 2003 and water quality was assessed (i) defining a bio-optical model, (ii) converting the Hyperion at-sensor radiances into subsurface irradiance reflectances, and (iii) adopting a bio-optical model inversion technique. The bio-optical model was parameterised using specific inherent optical properties of the lake and light field variables derived from a radiative transfer numerical model. A MODTRAN-based atmospheric correction code, complemented with an air/water interface correction was used to convert Hyperion at-sensor radiances into subsurface irradiance reflectance values. These reflectance values were comparable to in situ reflectance spectra measured during the Hyperion overpass, except at longer wavelengths (beyond 700 nm), where reflectance values were contaminated by severe atmospheric adjacency effects. Chlorophyll-a and tripton concentrations were retrieved by inverting two Hyperion bands selected using a sensitivity analysis applied to the bio-optical model. The sensitivity analysis indicated that the assessment of coloured dissolved organic matter was not achievable in this study due to the limited coloured dissolved organic matter concentration range of the lake, resulting in reflectance differences below the environmental measurement noise of Hyperion. The chlorophyll-a and tripton image-products were compared to in situ data collected during the Hyperion overpass, both by traditional sampling techniques (8 points) and by continuous flow-through systems (32 km). For chlorophyll-a the correlation coefficient between in situ point stations and Hyperion-inferred concentrations was 0.77 (data range from 1.30 to 2.16 mg m^− 3). The Hyperion-derived chlorophyll-a concentrations also match most of the flow-through transect data. For tripton, the validation was constrained by variable re-suspension phenomena. The correlation coefficient between in situ point stations and Hyperion-derived concentrations increased from 0.48 to 0.75 (data range from 0.95 to 2.13 g m^− 3) if the sampling data from the re-suspension zone was avoided. The comparison of Hyperion-derived tripton concentrations and flow-through transect data exhibited a similar mismatch. The results of this research suggest further studies to address compatibilities of validation methods for water body features with a high rate of change, and to reduce the contamination by atmospheric adjacency effects on Hyperion data at longer wavelengths in Alpine environment. The transferability of the presented method to other sensors and the ability to assess water quality independent from in situ water quality data, suggest that management relevant applications for Lake Garda (and other subalpine lakes) could be supported by remote sensing.     

Principles of engineering safety: Risk and uncertainty reduction

This article provides a systematised account of safety engineering practices that clarifies their relation to the goal of safety engineering, namely to increase safety. We list 24 principles referred to in the literature of safety engineering, dividing them into four major categories: Inherently safe design, Safety reserves, Safe fail and Procedural safeguards. It emerges from this systematisation that important aspects of these methods can be better understood with the help of the distinction between risk and uncertainty.     

SAT-Solving in Practice, with a Tutorial Example from Supervisory Control

Satisfiability solving, the problem of deciding whether the variables of a propositional formula can be assigned in such a way that the formula evaluates to true, is one of the classic problems in computer science. It is of theoretical interest because it is the canonical NP-complete problem. It is of practical interest because modern SAT-solvers can be used to solve many important and practical problems. In this tutorial paper, we show briefly how such SAT-solvers are implemented, and point to some typical applications of them. Our aim is to provide sufficient information (much of it through the reference list) to kick-start researchers from new fields wishing to apply SAT-solvers to their problems. Supervisory control theory originated within the control community and is a framework for reasoning about a plant to be controlled and a specification that the closed-loop system must fulfil. This paper aims to bridge the gap between the computer science community and the control community by illustrating how SAT-based techniques can be used to solve some supervisory control related problems.     

Bonding a HTPB liner to modern rocket case materials

Methods for bonding propellants based on HTPB (hydroxyl-terminated polybutadiene) to modern rocket motor case materials have been studied. Thus a typical rocket propellant liner, based on HTPB, was adhesion tested to various polymer materials and to an aluminum alloy. The polymer materials are an epoxy resin and composite materials, based on epoxy-poly(ether sulfone), poly(ether ether ketone), poly(amide imide), and poly(phenylene sulfide). With proper surface treatment, excellent results were obtained at separation tests for all materials with cohesive failure in the liner.     

Efficient Modular Synthesis of Isomeric Mono‐ and Bispyridyl[2.2]paracyclophanes by Palladium‐Catalyzed Cross‐ Coupling Reactions

Pyridyl‐substituted [2.2]paracyclophanes build a multifunctional structural motif that is useful in material chemistry, catalysis and for luminescent structures. Nonetheless, there is still a lack of general methods for the synthesis of these structures tolerating easily accessible bromides as well as different isomeric pyridyl groups. Hence the coupling of functionalized [2.2]paracyclophanes with various substituted and functionalized pyridyl derivatives was achieved using Stille, Suzuki and Kumada coupling conditions. Hereby the Stille coupling of a [2.2]paracyclophane is presented as a versatile reaction for the formation of heteromeric [2.2]paracyclophane‐containing biaryl structures.

     

Effect of acid deposition on quantity and quality of dissolved organic matter in soil-water

The aim of this study was to explore how acid deposition may affect the concentration and quality of dissolved organic matter (DOM) in soil-water. This was done by a small-scale acidification experiment during two years where 0.5 × 0.5 m(2) plots were artificially irrigated with water with different sulfuric acid content, and soil-water was sampled using zero-tension lysimeters under the O-horizon. The DOM was characterized using absorbance, fluorescence, and size exclusion chromatography analyses. Our results showed lower mobility of DOM in the high acid treatment. At the same time, there was a significant change in the DOM quality. Soil-water in the high acid treatment exhibited DOM that was less colored, less hydrophobic, less aromatic, and of lower molecular weight, compared to the low acid treatment. This supports the hypothesis that reduction in sulfur deposition is an important driver behind the ongoing brownification of surface waters in many regions.     

Untersuchungen zur heterogenen Kondensation von Wasserdampf in Membrankontaktoren

Heterogeneous condensation can contribute to improve the separation efficiency of airborne particles. Submicron particles can be separated due to inertial impaction when particle mass is previously enlarged sufficiently by water vapor condensation. This paper presents a novel, membrane‐based process for creating the requisite supersaturation for condensation. The increase of the particle size based on vapor condensation is detected by a new inline measuring technique.     

Acoustic emission during fatigue crack propagation in SiC particle reinforced Al matrix composites

The acoustic emission (AE) behavior during fatigue propagation in aluminum 6061 and aluminum 6061 matrix composites containing 5, 10, and 20 wt pct SiC particle reinforcement was investigated under tension-tension fatigue loading. The purpose of this investigation was to monitor fatigue crack propagation by the AE technique and to identify the source(s) of AE. Most of the AEs detected were observed at the top of the load cycles. The cumulative number of AE events was found to correspond closely to the fatigue crack growth and to increase with increasing SiC content. Fractographic studies revealed an increasing number of fractured particles and to a lesser extent decohered particles on the fatigue fracture surface as the crack propagation rate(e.g., †K) or the SiC content was increased. This article is based on a presentation made in the symposium entitled “Creep and Fatigue in Metal Matrix Composites” at the 1994 TMS/ASM Spring meeting, held February 28–March 3, 1994, in San Francisco, California, under the auspices of the Joint TMS-SMD/ ASM-MSD Composite Materials Committee.     

Iron Removal by a Passive System Treating Alkaline Coal Mine Drainage

The Marchand passive treatment system was constructed in 2006 for a 6,000 L/min discharge from an abandoned underground bituminous coal mine located in western Pennsylvania, USA. The system consists of six serially connected ponds followed by a large constructed wetland. Treatment performance was monitored between December 2006 and 2007. The system inflow was alkaline with pH 6.2, 337 mg/L CaCO₃ alkalinity, 74 mg/L Fe, 1 mg/L Mn, and <1 mg/L Al. The final discharge averaged pH 7.5, 214 mg/L CaCO₃ alkalinity, and 0.8 mg/L Fe. The settling ponds removed 84% of the Fe at an average rate of 26 g Fe m⁻² day⁻¹. The constructed wetland removed residual Fe at a rate of 4 g Fe m⁻² day⁻¹. Analyses of dissolved and particulate Fe fractions indicated that Fe removal was limited in the ponds by the rate of iron oxidation and in the wetland by the rate of particulate iron settling. The treatment effectiveness of the system did not substantially degrade during cold weather or at high flows. The system cost $1.3 million (2006) or $207 (US) per L/min of average flow. Annual maintenance and sampling costs are projected at $10,000 per year. The 25-year present value cost estimate (4% discount rate) is $1.45 million or $0.018 per 1,000 L of treated flow.